The Zyxel NWA1123ACv3 is a dual-band PoE 802.11ac Wave 2 access point that achieves a combined data rate of up to 1.2 Gbps. Thanks to its innovative design and emphasis on connection performance and reliability, the NWA1123ACv3 model achieves greater coverage and higher connection speeds for each client. NWA1123ACv3 supports the NebulaFlex solution, so you only need a few clicks and you can switch between stand-alone operation and unlicensed management in the cloud at any time using the Nebula platform. A combination of top performance and style
Forget the trade-offs between the performance of wireless enterprise access points and their compatibility with the interior. The stylish appearance of the NWA1123ACv3 access points fits perfectly into any interior and also helps prevent device theft. Optimally adapted to your needs
In order to offer users even better WiFi, we have significantly improved the software and hardware of the NWA1123ACv3 access point, including MU-MIMO technology and RF performance. Dynamic Channel Selection (DCS) and data load balancing also help ensure top-notch WiFi across workspaces. WPA3 standard for more secure networks
The NWA1123ACv3 access point supports the latest WPA3 standard, which provides stronger encryption and user authentication to better protect your wireless network. Drive it your way!
Thanks to compatibility with the scalable Zyxel NebulaFlex system for cloud network management, the NWA1123ACv3 access point can be managed using the Nebula Control Center (NCC) or operated independently (without a controller). Choose which solution best suits your needs. Wireless
IEEE802.11 standard ac/n/g/b/a
MIMO MU-MIMO
2.4 GHz wireless speed:
300Mbps
5 GHz:
866Mbps
Frequency band 2.4 GHz
USA (FCC): 2.412 to 2.462 GHz
Europe (ETSI): 2.412 to 2.472 GHz
5 GHz
USA (FCC): 5.15 to 5.25 GHz; 5.725 to 5.850 GHz
European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
Bandwidth 20-, 40- and 80-MHz
Conducted typical transmit output power US (2.4GHz/5GHz)
23/23dBm
EU (2.4GHz/5GHz)
19/23dBm
RF Design
Antenna type 2×2 MIMO Embedded Antenna
Antenna gain 2.4GHz
3 dBi
5GHz
4 dBi
Minimum receive sensitivity Up to -99 dBm
WLAN feature
Band Steering Yes
WDS/Mesh Yes
Fast roaming Pre-authentication, PMK caching and 802.11r/k/v
DCS Yes
Load balancing Yes
Security
Encryption
WEP
WPA
WPA2-PSK
WPA3
Authentication
WPA
WPA2-Enterprise
EAP
IEEE 802.1X
RADIUS authentication
Access management
L2 isolation
MAC filtering
Networking
IPv6 Yes
VLANs Yes
WMM Yes
APSD Yes
DiffServ marking Yes
Management
Operating mode
Cloud managed
standalone
ZON Utility
Discovery of Zyxel switches, APs and gateways
Centralized and batch configurations
IP configuration
IP renew
Device reboot
Device locating
Web GUI access
Firmware upgrade
Password configuration
Zyxel Wireless Optimizer
WiFi AP planning
WiFi coverage detection
Wireless health management
Web UI/CLI Yes
SNMP Yes
Physical Specifications
Item Dimensions (WxDxH) (mm/in.)
140 x 140 x 37.5 /5.51 x 5.51 x 1.48
Weight (g/lb.)
249/0.55
Packing Dimensions (WxDxH) (mm/in.)
240 x 155 x 60/9.45 x 6.10 x 2.36
Weight (g/lb.)
560/1.23
Included accessories
Power adapter
Ceiling-mount plate
MTBF (hr) 630,794
Physical Interfaces
Ethernet port 1x 10/100/1000M LAN
Power
Input: AC 100 – 240V – 50/60 Hz 0.3A; Output: DC + 12V 1A
PoE (802.3af): power draw 11 W
Environmental Specifications
Operating Temperature
0 ? C to 50 ? C/32 ? F to 122 ? F
Humidity
10% to 90% (non-condensing)
Storage Temperature
-40 ? C to 70 ? C/-40 ? F to 158 ? F
Humidity
10% to 90% (non-condensing)
Certifications
Radio
FCC Part 15C
FCC Part 15E
ETSI EN 300 328
EN 301 893
LP0002
EN 60601-1-2
EMC
FCC Part 15B
EN 301 489-1
EN 301 489-17
EN55022
EN55024
EN61000-3-2/-3
BSMI CNS13438
Safety
EN 60950-1
IEC 60950-1
BSMI CNS14336-1