product description UAP-IW-HD is a MU-MIMO ac Wave2 access point from the UniFi family, which is designed to be built into the wall.
In the 5GHz band, it supports 4×4 MU-MIMO technology with a maximum modulation speed of 1733Mb/s. A radio with 2×2 MIMO technology and a modulation speed of 300 Mb/s is available for the 2.4 GHz band. The device itself can be powered using POE 802.3af. In the caseof using the PoE passthrough function, it is necessary to use the power supply of the 802.3at standard. The device is also equipped with an Ethernet switch, on the bottom you will find 4 Gigabit Ethernets, where the PoE passthough function can be used on the first port. 1 incoming Gigabit port can be found on the back side built into the wall. Technical parameters Wireless features
Wireless frequency: 2.4 + 5GHz (dual band)
WiFi transmission speed – 2.4GHz [Mb/s]: 300
WiFi transmission speed – 5GHz [Mb/s]: 1733
WiFi standards: 802.11ac, 802.11ac – wave2, 802.11n, 802.11a, 802.11b/g
Encryption: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) 802.1w/PMF
2.4GHz OUT: 2×2
5GHz OUTSIDE: 4×4
Antenna type: Built-in Physical characteristics Use: Internal
Buttons: Reset Connectors and interfaces
LAN Speeds: (4) 10/100/1000Mbps
Gigabit LAN: Yes Power supply
Power supply via PoE: 802.3af, 802.3at, 48V DC
PoE types: Input and output Software
Operating mode: Access Point
IPv6 support: Transparent (bridge mode)
Default IP address: Dynamic from DHCP
Default username and password: Ubiquiti/Ubiquiti