The first UAP with WiFi 6 expands the UniFi range! In the Longrange version with an extended range thanks to higher transmission power. The dual-band radio, which boasts 4×4 MU-MIMO & OFDMA in the 5GHz band and 4×4 MIMO in the 2.4GHz band, achieves an aggregate throughput of up to 3Gb/s. Thanks to its inconspicuous design, it fits into any environment, and due to the design with IP54 protection, it can be used partly outdoors in addition to indoor installations. Key properties 1.3GHz Dual-core CPU 4 stream Wi-Fi 6 technology 5GHz bandwidth up to 2.4Gbps 2.4GHz bandwidth up to 600Mbps 802.3at POE power supply Central control of units To manage the device, you need to download the original software UniFi Network application from the official website, thanks to which the entire network can be controlled. The indisputable advantage of the UniFi Network application is that it is completely free without any restrictions!
This central management will allow you to upload maps and set basic parameters as well as advanced functions such as SSID, guest account, start page, traffic statistics and the list and status of associated clients always easily and quickly. Advantages of the UniFi solution Fast Roaming – uninterrupted transition between individual APs Wireless uplink (suitable where it is not possible to get a data cable) up to 8 SSIDs detailed traffic statistics Guest network Load balance – maintaining an even load/switching of clients rate limiting for each SSID Package contents device ceiling/wall mounting kit set of screws Technical parameters Wireless frequency: 2.4 + 5GHz (dual band)
WiFi standards: 802.11ac, 802.11ax, 802.11n, 802.11a, 802.11b/g
MU-MIMO: Yes
Transmission speed – 2.4GHz [Mbps]: 600
Transmission speed – 5GHz [Mb/s]: 2400
2.4GHz Transmit Power [dBm]: 26
5GHz Transmit Power [dBm]: 26
Encryption: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
Antenna type: Built-in
Number of built-in antennas: 8
Roaming: Yes
Antenna gain [dBi]: 4, 5.5
LAN speed: (1) 10/100/1000 Mbps
Gigabit LAN: Yes
Power supply method PoE+, passive PoE (48V)
Power supply via PoE: 802.3at, passive PoE 44 .. 57V DC, 0.5 A
PoE types: PoE-In (only)
Max. power consumption [W]: 18.5
Degree of protection: IP54
Use: Outdoor
Buttons: Reset
Operating temperature [?C]: -30 to 60
Weight [g]: 800
Height [mm]: 48
Depth [mm]: 220
Width [mm]: 220
Operating mode: Access Point
IPv6 support: Transparent (bridge mode)
Default IP address: Dynamic from DHCP