Ubiquiti PowerBeam M2, outdoor, 2.4GHz MIMO, 2x 18dBi, AirMAX OVERVIEW
PowerBeam is based on the former very successful NanoBridge product line. It now includes more powerful hardware and a smarter design.
The design has been simplified to the maximum, installation in the field is now faster and more convenient, for the sake of interest I would like to mention the button for releasing the main unit (radiator), which was a problem with the older generation. Inside the PowerBeam is a powerful Atheros 74KC MIPS processor with a frequency of 560MHz, which is supported by 64MB of DDR2 type operating memory and 8MB of Flash memory.
The network port supports 10/100 Ethernet and the unit can be powered via passive PoE 24V/0.5A (active PoE according to 802.3af is not supported).
The theoretical maximum throughput of the unit is 300Mbit (MCS15,802.11n, 2×2 MIMO, at a channel width of 40MHz). InnerFeed? technology integrates the radio part into the radiator from the antenna, eliminating potential loss on the RF cable. Package contents: device PoE power supply power cable parabola mounting kit for attaching to the mast plastic part for holding the radiator TECHNICAL SPECIFICATIONS
Wireless frequency [GHz]: 2.4
CPU: MIPS 74KC
CPU frequency [MHz]: 560
Max. power consumption [W]: 6
Power supply via PoE: 24V DC
Operating mode: Client, Repeater, AP Router, Access Point, Client Router (wisp)
Number of LAN ports: 1
Number of built-in antennas: 2
IPv6 support: Transparent (bridge mode)
PoE: Input
Operating temperature [?C]: -40 to 70
WiFi transmission speed – 2.4GHz [Mb/s]: 300
LAN speeds: (1) 10/100Mbps
Encryption: WPA2 AES
Buttons: Reset
Antenna type: Built-in
Operating memory size [MB]: 64
Outdoor use: Yes
Default IP address: 192.168.1.20
Default username and password: Ubiquiti/Ubiquiti
2.4GHz transmit power [dBm]: 28
WiFi standards: 802.11b/g/n
airMAX: Yes
Antenna gain [dBi]: 18
Width [mm]: 400
Height [mm]: 400
Depth [mm]: 289
Weight [g]: 1795