product description The NBE-2AC-13 is an improved client 13dBi station of the 2.4GHz AC series, which achieves very high transmission speeds and a stable connection even in noisy environments. The unit is designed for outdoor use.
Thanks to the possible setting of the channel width of 10/20 and 40MHz, a real throughput of up to 330Mbps+ can be achieved when using 256QAM. Inside the NanoBeam is a powerful MIPS processor Atheros 74KC with a frequency of 533MHz, which is supported by 64MB of DDR2 type operating memory. The network port supports 10/100/1000 Ethernet and the unit can be powered via the passive Gigabit PoE 24V/0.5A adapter included in the package (active PoE according to 802.3af is not supported). Technicians will certainly appreciate the newly included 2.4GHz WiFi interface, which is used for administration via a mobile device. The UMOBILE app is available for both Android and iOS. The new airOS 8 operating system is also new for all Gen2 products with the airMAX ac protocol. This system, for example, renders the constellation diagram and the SNR value in real time. Package contents: device Gigabit PoE power adapter 24V/0.5A power cable strapping tape plastic joint + plastic lock Technical parameters Wireless features
Wireless frequency: 2.4GHz
WiFi standards: airMAX ac
WiFi transmission speed – 2.4GHz [Mbps]: 433
2.4GHz Transmit Power [dBm]: 27
Encryption: WPA2 AES
2.4GHz OUT: 2×2
Antenna type: Built-in
Number of built-in antennas: 2
Antenna gain [dBi]: 13 Physical characteristics
Use: Outdoor
Buttons: Reset
Operating temperature [?C]: -40 to 70
Weight [g]: 530
Depth [mm]: 125
Width [mm]: 189
Height [mm]: 189 Hardware
RAM [MB]: 64
CPU: Atheros MIPS 74KC
CPU frequency [MHz]: 533 Connectors and interfaces
LAN Speeds: (1) 10/100/1000Mbps
Gigabit LAN: Yes
Others: WiFi management radio Power supply
Power supply via PoE: 24V DC
PoE types: PoE-In only
Max. power consumption [W]: 8.5 Software
Operating mode: Client, Repeater, AP Router, AccessPoint, Client Router (wisp)
IPv6 support: Yes
Default IP address: 192.168.1.20
Default username and password: Ubiquiti/Ubiquiti