TP-Link CPE510 Outdoor 5GHz 300Mbps OVERVIEW Built-in 13dBi 2×2 dual polarized directional antenna MIMO Adjustable transmission power from 0 to 27 dBm/500mW System-level optimization for wireless transmission over a distance of more than 15 km TP-LINK Pharos MAXtream Time-Division-Multiple-Access (TDMA) technology improves device performance in terms of throughput, capacity and latency, ideal for PTMP applications Centralized system of administration – Pharos management AP/Client/AP Router/AP Client Router (WISP) operating modes The passive PoE adapter supports Ethernet power up to 60 meters and allows remote device reset SPECIFICATIONS
HARDWARE FUNCTIONS
Processor Qualcomm Atheros Enterprise AR9350B 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Dimensions (w * d * h) 224 x 79 x 60 mm Antenna type Built-in 13dBi 2×2 Dual-polarized Directional Antenna Beam Width: 45 ? (H-Plane)/30 ? (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6000V Lightning Protection Consumption 13 Watts Max Note: When deployed using Passive PoE, the power drawn from the power psu will be higher by some amount depending on the length of the connecting cable. Power supply Passive Power over Ethernet via LAN0 (+ 4.5pins; -7.8pins) Voltage range: 16-27VDC Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS NETWORK FUNCTIONS
Wireless network standards IEEE 802.11a/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz, Dynamic) Up to 144.4Mbps (20MHz, Dynamic) Up to 72.2Mbps (10MHz, Dynamic) Up to 36.1Mbps (5MHz, Dynamic) Frequency 5.15 ~ 5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Intake sensitivity 802.11a: 54M: -75dBm, 48M: -76dBm, 36M: -83dBm, 6-24M: -95dBm 802.11n: MCS15: -73dBm, MCS14: -74dBm, MCS13: -76dBm, MCS12: -80dBm, MCS11: -83dBm, MCS10: -88dBm, MCS9: -90dBm, MCS8: -93dBm, MCS7: -73dBm, MCS6: -74dBm, MCS5: -76dBm, MCS4: -80dBm, MCS3: -83dBm, MCS2: -88dBm, MCS1: -90dBm, MCS0: -93dBm Transmission Power 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE FUNCTIONS
Wireless Configurations Pharos MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation > Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent (v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog OTHER
Certification CE, FCC, RoHS, IPX5 Package contents Outdoor Wireless CPE 24V 1A Passive PoE Adapter Pole Mountin