Outdoor CPE device 2.4GHz 300Mbit/s 12dBi
CPE220 – Built-in 12dBi 2×2 directional MIMO antenna with double polarization
– Adjustable transmission power from 0 to 30dBm/1000mWOptimization at system level for more than 13km wireless transmission range
– TP-LINK Pharos MAXtream Time-Division-Multiple-Access (TDMA) technology improves device performance in terms of throughput, capacity and latency, ideal for PTMP applications
– Centralized control system – Pharos control
– AP/Client/Bridge/Repeater/AP Router/AP Client Router (WISP) operating modes
– Passive PoE adapter supports power over Ethernet up to 60 meters and allows remote device reset HARDWARE FEATURES Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc
Memory 64MB DDR2 RAM, 8MB Flash
Interface:
– 1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in)
– 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
– 1 Grounding Terminal
– 1 Reset Button
Power Supply:
– Passive Power over Ethernet via LAN0 (+ 4.5pins; -7.8pins)
– Voltage range: 16-27VDC
Dimensions (WXDXH) 11 ? 3.1 ? 2.1 inch (276 ? 79 ? 60 mm)
Power Consumption 10.8 Watts Max, Note: When deployed using Passive PoE, the power drawn from the power psu will be higher by some amount depending on the length of the connecting cable.
Antenna Type:
– Built-in 12dBi 2×2 Dual-polarized Directional Antenna
– Beam Width: 60 ? (H-Plane)/30 ? (E-Plane), Note: For more details, please refer to datasheet
Protection:
– 15KV ESD Protection
– 6KV Lightning Protection
Enclosure:
– Outdoor ASA stabilized plastic material
– IPX5 waterproof Certification WIRELESS FEATURES Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds:
– Up to 300Mbps (40MHz, Dynamic)
– Up to 144.4Mbps (20MHz, Dynamic)
– Up to 72.2Mbps (10MHz, Dynamic)
– Up to 36.1Mbps (5MHz, Dynamic)
Frequency 2.4 ~ 2.483GHz, Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
Transmission Power 30dBm/1000mw (Adjustable power by 1dBm), Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE FEATURES Wireless Configurations:
– Pharos MAXtream TDMA Technology
– 802.11b/g/n Modes
– Selectable Channel Width: 5/10/20/40MHz
– Automatic Channel Selection
– Transmission Power Control
– Dynamic Frequency Selection (DFS)
– WDS Enable/Disable
– Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
– SSID Broadcast Enable/Disable
– Multi-SSID with VLAN Tagging (AP mode only)
– Distance/ACK Timeout Setting
– Wireless MAC Address Filter
– Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
> Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management:
– Discovery and Remote Management via Pharos Control application
– HTTP/HTTPS Web-based management
– System Log
– SNMP Agent (v2c)
– Ping Watch Dog
– Dynamic DDNS
– SSH Server
System Tools:
– Wireless Signal Quality Indicators:
– Signal Strength/Noise/Transmit CCQ/CPU/Memory
– Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
– Spectrum Analyzer
– Speed Test
– Ping
– Traceroute
System-level Optimizations:
– Optimized IGMP Snooping/Proxy for multicast applications
– Hardware watch dog POE ADAPTER FEATURES Interfaces:
– 1 AC Jack with Earth Ground
– 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data)
– 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data)
Efficiency> 80%
Button Remote Reset Button
Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
Power Status LEDs:
– 0 ~ 0.8A: Green
– 0.8A ~ 1.0A: Red
Output 24VDC, 1.0A Max
+4.5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Input Voltage 100VA ~ 240VAC @50Hz ~ 60Hz
Dimensions (W x D x H) 110 ? 57 ? 33.5mm
Input Current 0.8A Max @ 100VAC
Input 100-240VAC, 50/60Hz
Output Voltage 24VDC (+ 4.5pins; -7.8pins) OTHERS Certification CE, FCC, RoHS, IPX5
Package Contents:
– Outdoor Wireless CPE
– 24V 1A Passive PoE Adapter
– Pole Mounting Straps
– AC Power Cord
– Installation Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista Windows or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user
experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Environment:
– Operating Temperature: -30 C – 70 C
– Storage Temperature: -40 C – 70 C
– Operating Humidity: 10% ~ 90% non-condensing
– Storage Humidity: 5% ~ 95% non-condensing