NETGEAR WAC510
Dual-band wireless access point with remote management Manufacturer website link: http://netgear.com/business/products/wireless/insight-managed-wireless/WAC510.aspx Function The WAC510 is the first device of its kind to support control via a mobile application. The free NETGEAR Insight utility allows the WAC510 to be easily set up, configured and further managed in minutes. Users do not have to spend additional funds on the purchase of controllers or similar devices designed to manage access points. Thanks to the NETGEAR Insight application, they also get a continuous overview of data transmissions or the number of connected devices – from anywhere within the range of the mobile signal. High speed connection for 200 users The combination of the 802.11ac Wave 2 Wi-Fi standard and MU-MIMO technology offers WAC510 users top performance, wide coverage and data connections at speeds of up to 1.2 Gb/s (300 Mb/s in the 2.4 GHz band and 867 Mb/s). 5GHz band). Thanks to the WDS system, the device can be used either as a router or a separate access point, where up to 200 users can be connected to the WAC510 at the same time. Two Gigabit Ethernet (1 ? PoE) ports with Auto Uplink are available for wired connections. High level of security and lifetime warranty The WAC510 access point offers enterprise-class security in the form of WPA and WPA2 encryption, MAC address filtering, and monitoring and blocking of unwanted devices on the network. The novelty also offers an advantageous combination of a lifetime hardware warranty and NBD (Next Business Day) replacement, which allows first owners not only to complain about defective equipment at any time, but also to request a replacement during the next working day free of charge. In addition, these two types of warranties are complemented by lifetime online technical support provided 24/7. Properties Installation, configuration and management via the NETGEAR Insight mobile application. 802.11ac Wave 2 Wi-Fi standard. Maximum theoretical throughput of up to 1.2 Gb/s. MU-MIMO technology providing parallel data streaming to multiple devices. Router or access point mode. Two gigabit Ethernet ports (1 ? PoE). PACKAGE CONTENTS 1x NETGEAR WAC510 wireless access point 1x accessories for wall or ceiling mounting of the device 1x installation manual SPECIFICATIONS Technical properties Standards: IEEE 802.11ac Wave 2 WMM Wireless Multimedia Prioritization WDS Wireless Distribution System Power over Ethernet (PoE) IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Device management: NETGEAR Insight application for easy installation, configuration and management of the access point SNMP v1, v2 Security: Wi-Fi Protected Access (WPA, WPA2) Monitor and block unwanted devices on the network MAC address filtering Physical interface and indicators: Two (WAN/LAN) 10/100/1000BASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X); IEEE 802.3af or 802.3at PoE support Charger (not included): 12V DC, 2.5A; tailored to the needs of a particular country Six LED indicators: Power, Link/ACT, LAN 1, LAN 2, 2.4GHz, 5GHz Size and weight: Dimensions: 197 x 197 x 37 mm Weight: 556 g For more information, visit the manufacturer website.