VIDEO PRESENTATION OVERVIEW Maximizes wireless coverage with superior outdoor access Extends wireless coverage to outdoor with the high power WND930 Access Point. The WND930 Access Point combines industrial and robust design with flexible antenna options, and dual band (2.4 and 5 GHz) concurrent operation for optimal outdoor deployment. The WND930 Outdoor Access Point is powered by redundant dual Power over Ethernet (PoE) gigabit ports as well as the capability to power other PoE devices. The WND930 Outdoor Access Point operates under harsh environment with its industrial grade IP67 enclosure and an embedded heater to allow the Access Point to operate in below freezing point temperature. Through its user friendly interface and mounting accessory kits, the WND930 Access Point can be configured and installed easily in less than 10 minutes. NETGEAR Warranty This product is backed by a NETGEAR limited 2-year Hardware Warranty. http://www.netgear.com/about/warranty/ ProSUPPORT 24×7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts. ProSUPPORT Lifetime 24×7 Advanced Technical Support via chat. (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). TECH SPECS Product Number WND930 Physical Characteristics
Power Power over Ethernet (802.3af or 802.3at) 2 ports 802.3af or 1 port of 802.3at for AP operation 2 ports of 802.3at for concurrent AP and PoE PSE operations Physical Dimensions Dimensions (LxWxH) 255x225x78 mm Weight 1894 Mounting Wall mount/pole mount kit included Interfaces and Indicators
Physical Interfaces Two (10/100/1000Base-T Ethernet (RJ-45) port with Auto UplinkTM (Auto MDI-X) with PoE PD (Power over Ethernet In) One (10/100/1000Base-T Ethernet (RJ-45) port with Auto UplinkTM (Auto MDI-X) with PoE PSE (Power over Ethernet Out) External Antenna Connectors Two connectors for 2.4GHz antennas Type N connector (female) Two connectors for 5 GHz antennas Type N connector (female) LEDs Power, Activity, 2.4GHz, 5 GHz, Heater Default Reset
Environmental Conditions
Operating Temperature (-20 ? to 60 ? C) Storage Temperature (-40 ? to 80 ? C) Operating Relative Humidity 10% minimum 90% maximum Storage Humidity Minimum 5% Maximum 95% MTBF @ 25 ? C> 10.45K hours @ 60 ? C> 290,000 hours Ingress Protection Marking IP67 rated Power Consumption 15.2 W max (heater off, no PoE out) 25.1 W max (heater on, no PoE out) 33.9 W max (heater off, PoE out) 43.8 W max (heater on, PoE out) RF Characteristics
Standards IEEE 802.11n 2.0 specification IEEE 802.11g IEEE 802.11b IEEE 802.11a Frequency Band 2.4GHz and 5 GHz dual band concurrent operation Maximum RF Power Output (country dependent) 27 dBm (500 mW) 2.4GHz 26 dBm (400 mW) 5 GHz Maximum Theoretical Throughput 300 Mbps (2.4GHz) 300 Mbps (5 GHz) Antenna Gain 8 dBi (2.4GHz) 8 dBi (5 GHz) Network Management Standalone Centralized management (future) AdvancedWirelessModes WDS Point-to-point wireless bridge mode Wireless Access point mode Security Wired Equivalent Privacy (WEP) Encryption WiFi Protected Access Pre-shared Key (WPA-PSK, WPA2-PSK) MAC address filtering 1 BSSID 802.11e WMM Wireless multimedia mode for QoS Package Contents Outdoor High Power Wireless N Access Point Wall mounting bracket Pole mount clamps Weatherproof cable glands Installation guide Warranty/support information card Safety Certification ITU-T K.21 Optional Support PMB0351: 5 years OnCall 24×7 PMB0331: OnCall 24×7 PMB0311: 1 year OnCall 24×7 PRR0351: 5 years XPressHW PRR0331: XPressHW Product Ordering Information WND930-10000S High Power Dual Band Outdoor 802.11n Wireless Access Point WND930-100NAS High Power Dual Band Outdoor 802.11n Wireless Access Point (US) ANT24501B-10000S External antenna bundles (2 x 2.4GHz and 2 x 5 GHz) WEBSITE Technical specification: http://www.netgear.com/business/products/wireless/business-wireless/WND930.aspx#tab-techspecs