OVERVIEW MikroTik platform system solution for wireless Internet service providers.
Dual 2.4 and 5GHz 802.11ac access point with support for the latest 802.11n/ac standards.
Based on a 650MHz CPU, equipped with 64MB RAM, it has five 10/100Mbps Ethernet ports (PoE output on port 5).
An integrated dual-chain 802.11b/g/n 2.4GHz wireless module and a single-chain 802.11ac 5GHz wireless module, include a pre-installed RouterOS L4 license.
Functional expandability thanks to the built-in USB port for connecting a USB drive or 3G/4G modem, support for POE power supply on port 1, IPv6 support, surge protection on ports 1 and 5.
It is based on the requirements for the solution of small home WIFI networks with a high transmission speed while maintaining high parameter equipment. TECHNICAL SPECIFICATIONS Product code: RB952Ui-5ac2nD
CPU nominal frequency: 650 MHz
CPU core count: 1
Size of RAM: 64 MB
Storage type: Flash
Storage size: 16 MB
10/100 Ethernet ports: 5
Wireless bands: 5 GHz radio, 2.4 GHz radio
Operating frequency: 5150 – 5875 MHz, 2412 – 2484 MHz
Protocols: 802.11a/n/ac 802.11b/g/n
Chains: Single-chain Dual-chain
Antenna gain: 2 dBi, 1.5 dBi
Wireless chip model: QCA9887 QCA9531
Antenna beam width: 360 ?
PoE in: Yes
PoE out: Yes (Ether5), 0.5 A
Supported input voltage: 8 V – 30 V (Jack or Passive PoE)
Extras: USB 2.0 Type A full size port, 1 A
Dimensions: 113 x 89 x 28mm
License level: 4
Operating System: RouterOS
CPU: QCA9531
Max Power consumption: 7 W Notice:
The manufacturer Mikrotik does not provide a guarantee for equipment damaged by overvoltage.
The device must be adequately protected against induced electrostatic overvoltage or overvoltage peaks on the power line.
For outdoor installations, use only shielded cabling (FTP/SFTP) and ground the units correctly (via the integrated grounding element or using Ethernet surge protection).