MikroTik RB912UAG-2HPnD-OUT
MikroTik platform system solution for wireless Internet service providers. OVERVIEW
The unit consists of a RouterBoard RB912UAG-2HPnD integrated in a waterproof UV-resistant box with 2x SMA output for connecting external antennas. The units are supplied with a pre-installed and activated RouterOS V5 L4 operating system, the delivery includes mounting accessories for installation on a pole or on a DIN rail, 24V power supply with POE Part of delivery:
? 1x outdoor unit
? 1x mounting preparation for mounting the unit on a mast/console
? 1x mounting preparation for mounting the unit on a DIN rail
? 1x power supply
? 1x POE injector SPECIFICATIONS
? Model RB912UAG-2HPnD-OUT
? Features: 1 Ethernet, 1 miniPCIe, USB, Additional memory, Gigabit, High power, Dual chain, Outdoor case
? CPU: Atheros AR9342 600MHz network processor
? Radio modules: built in 2.4 GHz 802.11b/g/n, 2x RP-SMA connectors
? Memory: 64MB DDR2 onboard memory
? Ethernet: One Gigabit port with Auto-MDI/X
? Antenna: 2x RP-SMA connectors for external antenna link
? Extras: reset, beeper, signal and status LEDs, SIM slot (requires 3g miniPCIe card)
? Expansion: miniPCIe slot for 802.11 or 3G (using 3G disables the USB port), USB 2.0 port
? Power options: PoE: 8-30V DC on Ether1 (Non 802.3af).
? Dimensions: 246x135x50mm; Weight: 390g
? Max consumption: 14W at 24V
? OS: MikroTik RouterOS, Level4 license (supports wireless AP mode)
? Kit includes: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount ! WARNING!
The manufacturer Mikrotik does not provide a guarantee for equipment damaged by overvoltage. The device must be adequately protected against induced electrostatic overvoltage or overvoltage peaks on the power line.
For outdoor installations, use only shielded cabling (FTP/SFTP) and ground the units correctly (via the integrated grounding element or using Ethernet surge protection).