Cisco Meraki MR46E – Wi-Fi 6 with multigigabit Ethernet and external antennas. Function 4 radios: 2.4 GHz, 5 GHz, dual-band WIDS/WIPS and Bluetooth Low Energy (BLE) 4-stream UL/DL MU-MIMO 802.11ax, up to 3.55 Gbps dual aggregate frame rate 6 ? RP-TNC external antenna connectors 1 ? 2.5 Gbps multigigabit Ethernet port PoE: 802.3at, Network adapter available Technical parameters Radios Radio for access to 2.4 GHz 802.11b/g/n/sec 5 GHz 802.11a/n/ac/ax access radio for clients 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectral analysis and radio position analysis 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Simultaneous operation of all three radios Supported frequency bands: 2.412 – 2.844 GHz 5.150 – 5 250 GHz (UNII-1) 5,250 – 5,350 GHz (UNII-2) 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 5.1725 – 5.825 GHz (UNII-3) Antenna List of compatible antennas: MA-ANT-3-A6/B6/C6/D6/E6/F6 Individual antenna elements for each radio 802.11ax, 802.11ac Wave 2 and 802.11n capabilities UL/DL OFDMA, TWT support, BSS coloring 4 ? 4 multiple input, multiple output (MIMO) with four spatial flows UL/DL SU-MIMO and MU-MIMO support Combination of maximum ratio (MRC) and beam shaping 160 MHz (80 + 80); 20, 40 and 80 MHz channels (802.11ax), 160 MHz (80 + 80) Up to 1024 QAM in the 2.4 GHz and 5 GHz bands Packet aggregation Power supply Power over Ethernet: 42.5-57 V (802.3at required; 802.3af mode with limited functionality supported) Alternative 12 V DC input Power consumption: max. 18 W (802.3at) Interface 1 ? 10/100/1000/2.5 G Ethernet BASE-T (RJ45) 1 ? DC power connector (5.5 mm ? 2.5 mm, center positive) Six external RP-TNC antenna connectors Physical dimensions 30.72 cm x 15.62 cm x 3.49 cm without feet for table or mounting plate mounting Mass 0.85 kg Link to the website of the manufacturer: https://meraki.cisco.com/product/wi-fi/indoor-access-points/mr46e/