Cisco Meraki MR56 Cloud Managed AP. Wi-Fi 6 (802.11ax) with multigigabit Ethernet. Wi-Fi performance and efficiency 6 with dedicated security radio. Radios Radio for access to 2.4 GHz 802.11b/g/n/sec 5 GHz 802.11a/n/ac/ax access radio for clients 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectral analysis and radio position analysis 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon support Simultaneous operation of all four radios Maximum aggregate frame rate: 5.9 Gbps Antenna Integrated omnidirectional antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) Individual antenna elements for each radio Power supply Power over Ethernet: 42.57-57 V (802.3at required; 802.3af mode with limited functionality supported) Alternative 12V DC input Power consumption: max. 22 W (802.3at) PoE injector and DC adapter are sold separately Interface 1 ? 100/1000/2.5/5G BASE-T Ethernet 1 ? DC power connector (5.5 mm ? 2.5 mm, center positive) Construction Including all standard mounting hardware Table, ceiling and wall Physical security Including two safety screws Concealed mounting plate with cable position against unauthorized manipulation Physical dimensions 32.6 cm ? 14.08 cm ? 4.47 cm, without mounting plate Weight: 1 kg Safety Integrated Layer 7 firewall with mobile device policy management WIDS/WIPS real-time notification and automatic detention of rogue APs with Air Marshal Flexible access for guests with insulation facilities VLAN tagging (802.1Q) and tunneling using IPSec VPN PCI Compliance Report WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE) EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP and AES encryption Integration of enterprise mobility management (EMM) and mobile device management (MDM) Cisco ISE integration for guest access and BYOD positions